HS210 switch hooked up standalone, can't turn off light
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I changed my plan for an HS210 kit and decided to use one of the switches on its own for a front porch light. I hooked it all up perfectly, as far as I thought, and the porch light is on and I was able to get my single HS210 switch on wifi and firmware update it, but i can't turn the light off. It's basically on 24/7.
If I press the switch itself nothing happens.
If I hit the power icon in the app I hear the switch make a click sound but the light stays on, doesn't even flicker. The power icon in the app goes off for about 3 seconds then turns back on so it doesn't want to stay off there either.
Does anyone have any ideas?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
From the current situation, it seems that there is something wrong about the physical installation.
Below are the setup instruction:
https://www.tp-link.com/us/download/HS210-KIT.html#video
https://www.tp-link.com/en/faq-2009.html
Meanwhile, the pictures of physical installation will be much better.
- Copy Link
- Report Inappropriate Content
From the current situation, it seems that there is something wrong about the physical installation.
Below are the setup instruction:
https://www.tp-link.com/us/download/HS210-KIT.html#video
https://www.tp-link.com/en/faq-2009.html
Meanwhile, the pictures of physical installation will be much better.
- Copy Link
- Report Inappropriate Content
Thanks for the links and the inspiration. I wish I'd had that when we wired the unit up, much better than using YouTube.
I rewired it and put the load on the traveler and that fixed it up, working great now!
- Copy Link
- Report Inappropriate Content
Glad to hear that the issue was resolved finally. Congrats. ^_^
Regarding to the setup instruction, we will feed back to our related department and they will work on it.
- Copy Link
- Report Inappropriate Content
It appears you only need to use one of the HS210 switches on a 3 way circuit to make it work. ... AndroidDev01Giveaway Correspondent; Sgt-JimmyRustlesCan't flim ... I am thinking I can hook up the hot wire to the line screw and then .... When I turn the HS210 on I hear a click but the lights dont come on.
- Copy Link
- Report Inappropriate Content
Hello
The HS210KIT can work with the ordinary three-way switch, while please notice that we need connect only one HS210 to Line wire and the ordinary three-way switch to Load wire.
Good day.
- Copy Link
- Report Inappropriate Content
@ctrl77 Have you solved the porch light problem?
You should have a white Neutral wire connected.
Here is a drawing of the switch. (attached)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2914
Replies: 6
Voters 0
No one has voted for it yet.