HS110 not reporting Power Data since firmware update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS110 not reporting Power Data since firmware update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
22 Reply
Re:Re:Re:Re:Re:Re:HS110 not reporting Power Data since firmware update
2019-05-10 01:09:09

Hi,

 

Chang another outlet to plug the HS110 and use another device for a while to test the energy monitoring feature. 

 

If still the same, please contact our tech support to check the warranty. 

 

Good day. 

 

rds wrote

Since this thread is about a smilar issue, adding mine here.

 

Model: HS110

Hardware Version: V2.1

Firmware Version: 1.5.7

 

Less than 2 months and barely used. Turned it on after a while and energy monitoring shows 0.00W while plugged into a PC which used to show around 100W on the same smart plug before.

 

Did a reset twice, re-installed the android app, but same screen. Primary purpose for me is energy monitoring. Can anyone advise if this a firmware issue or its faulty.

 

If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#13
Options
Re:HS110 not reporting Power Data since firmware update
2019-06-29 12:56:30

Same problem here

hw version 2.0

firmware verion 1.5.4

 

Any solutions?

  0  
  0  
#14
Options
Re:Re:HS110 not reporting Power Data since firmware update
2019-06-30 00:24:32

E-raser wrote

Same problem here

hw version 2.0

firmware verion 1.5.4

 

Any solutions?

I would update your firmware, but if it is still a problem then it is faulty.

  0  
  0  
#15
Options
Re:Re:HS110 not reporting Power Data since firmware update
2019-07-01 01:09:52

Hi,

 

Try to update the firmware or hard reset it and reconfigure it.

 

Change another appliance plugged into it.

 

Try to power cycle it as well. 

 

If still the same, please contact our tech support to check the warranty. 

 

Good day. 

E-raser wrote

Same problem here

hw version 2.0

firmware verion 1.5.4

 

Any solutions?

 

If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#16
Options
Re:Re:HS110 not reporting Power Data since firmware update
2019-12-16 21:26:42

@Kevin_Z 

 

Same problem here

 

Model : HS110

HW : 2.0

FW : 1.5.4

 

energy consumption is "0" all the time.

 

  0  
  0  
#18
Options
Re:Re:HS110 not reporting Power Data since firmware update
2019-12-20 12:07:54

@eistek 

 

Hello, try to change another appliance to plug into the HS110. And try to change another wall socket. 

 

Besides, try to hard reset the smart plug and reconfigure to verify whether it works. 

 

Still the same, please tell us the mac address of this HS110.

 

Good day. 

If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#19
Options
Re:Re:HS110 not reporting Power Data since firmware update
2019-12-31 04:32:47

Same problem here. I have 5 of these plugs and already 2 are no longer reporting power usage. They're all on the same firmware version (1.5.5). Also, none of them have ever worked properly with tp-link's own mesh wifi (deco m5) as they continually disconnect and reconnect. And I bought the mesh wifi because one of the plugs was too far for the normal wifi. I'm just moving to alternative products (I have a Xiaomi plug that works perfectly).

  0  
  0  
#23
Options
Re:Re:HS110 not reporting Power Data since firmware update
2020-01-08 07:29:30

@mbb 

 

Hello, could you please show us the screenshots of the power consumption page on the kasa app of the HS110? 

 

What is the model number of the appliance plugged into the HS110? Considering the other three work well, you can swap the appliance to do a comparison analysis. 

 

Besides, for the unstable connection, you can disable fast roaming to give it a go. 

 

May it help. 

If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#26
Options
Re:HS110 not reporting Power Data since firmware update
2020-01-12 13:59:36

hello

 

What is the current hardware and firmware version of the HS110?

https://iranlens.ir/
  0  
  0  
#27
Options
Re:Re:HS110 not reporting Power Data since firmware update
2020-10-06 12:55:39

@Kevin_Z
I also recently bought two HS110. One is working Ok but the second doesn't show Power Data.
Hardware-Version: 4.0
Firmware-Version 1.0.4
I already resetted and reconnected it. But still the same. I can switch power via Kasa App but when I go to "Energieverbrauch/Energy Usage" I see a gray Message "Etwas ist schiefgegangen/Something went wrong" and everything except Total consumtion (0,00 kWh) and Runtime shows emty values "-.--".

Is there anything else I can do or do I have to send it back?

 

Greetings Frank

  1  
  1  
#28
Options
Related Articles