KASA Firmware update: Update Not Complete.... to 1.1.1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

KASA Firmware update: Update Not Complete.... to 1.1.1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
KASA Firmware update: Update Not Complete.... to 1.1.1
KASA Firmware update: Update Not Complete.... to 1.1.1
2020-12-16 17:19:44 - last edited 2023-11-15 07:15:12
Model: HS100  
Hardware Version: V4
Firmware Version: 1.1.0

Trying to update my KASA TP link plugs from 1.1.0 to 1.1.1 but getting the message when I press udpate.

 

Update not Complete

 

One or more of your devices failed to update. Please try the update again.

 

I've tried to update about 6 times with same message.


Can anyone assist? Thank you.

  0      
  0      
#1
Options
1 Accepted Solution
Re:KASA Firmware update: Update Not Complete.... to 1.1.1-Solution
2020-12-17 01:21:54 - last edited 2020-12-18 08:54:35

@Jinkster1 

Good day,

Please refer to the following instruction to have a look:

1. reboot the main router and check again;

--if still not available, please try to remove it from Kasa, re-add and then check for upgrade;

Thank you very much and wait for your reply.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:KASA Firmware update: Update Not Complete.... to 1.1.1-Solution
2020-12-17 01:21:54 - last edited 2020-12-18 08:54:35

@Jinkster1 

Good day,

Please refer to the following instruction to have a look:

1. reboot the main router and check again;

--if still not available, please try to remove it from Kasa, re-add and then check for upgrade;

Thank you very much and wait for your reply.

Recommended Solution
  0  
  0  
#2
Options