Smart Home Community > Kasa Smart Plugs > Energy Consumption Value Jumps (KP115)
< Kasa Smart Plugs

Energy Consumption Value Jumps (KP115)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Energy Consumption Value Jumps (KP115)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Energy Consumption Value Jumps (KP115)
Energy Consumption Value Jumps (KP115)
2021-02-25 05:48:44 - last edited 2021-02-25 10:10:29
Model: KP105  
Hardware Version: V1
Firmware Version: 1.0.10

Model KP115  (not listed on the models on this forum!)

 

Hi,

 

I recently bought two KP115 plugs with energy monitoring here in Australia. I already have 6 HS110 plugs. The new plugs seem to be jumping daily Energy Consumption values and it is predictable. My device uses around 30kWh a day so this happens twice a day. 1st when it reaches 8.2kWh it jumps to 16.4kWh then again from 24.5kWh to 32.8kWh.

 

New plug 01

 

 

New plug 02

 

 

Old plug

 

Why is this happening?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Energy Consumption Value Jumps (KP115)-Solution
2021-02-25 10:10:22 - last edited 2021-05-08 01:43:23

@NaduK 

Hi,

Thank you very much for your feedback.

Please try to update the following firmware to have a look:

KP115(US) V1/KP115(EU) V1/KP115(AU) V1/KP115(UK) V1 all available:

https://static.tp-link.com/beta/2021/202105/20210508/Upgrade_Instruction_KP115_V1_fix_power_consumption_issue.zip

please feel free to update here with further improvement.

Deco Monthly Recap- Check What's Currently Going on With Deco
Recommended Solution
  0  
  0  
#2
Options
6 Reply
Re:Energy Consumption Value Jumps (KP115)-Solution
2021-02-25 10:10:22 - last edited 2021-05-08 01:43:23

@NaduK 

Hi,

Thank you very much for your feedback.

Please try to update the following firmware to have a look:

KP115(US) V1/KP115(EU) V1/KP115(AU) V1/KP115(UK) V1 all available:

https://static.tp-link.com/beta/2021/202105/20210508/Upgrade_Instruction_KP115_V1_fix_power_consumption_issue.zip

please feel free to update here with further improvement.

Deco Monthly Recap- Check What's Currently Going on With Deco
Recommended Solution
  0  
  0  
#2
Options
Re:Energy Consumption Value Jumps (KP115)
2021-02-25 11:10:27 - last edited 2021-02-25 11:18:11

@TP-Link 

 

Hi,

 

It didn't work. I don't think the software knows about this plug.

 

 

I followed the instruction file and checked the KASA app and it's not updated.

 

I checked the config file and it only mentions HS100 and HS110. No mention of KP115 for AU.

 

  0  
  0  
#3
Options
Re:Energy Consumption Value Jumps (KP115)
2021-02-26 02:47:25

@NaduK 

Hi,

Could you please try to change the following information on the config file:

"support_list":"KP115(UK)V1",
            "model":"KP115(UK)",

Change all the UK to AU to have a test;

Thanks and wait for your reply.

 

 

 

Deco Monthly Recap- Check What's Currently Going on With Deco
  0  
  0  
#4
Options
Re:Energy Consumption Value Jumps (KP115)
2021-03-01 12:23:42

@TP-Link I was thinking of doing that but was afraid I might brick it then because TP-Link suggested it, I did and it seems to be fixed! Thanks

  0  
  0  
#5
Options
Re:Energy Consumption Value Jumps (KP115)
2021-09-27 06:37:22

@NaduK Hi Naduk, I'm new to all this but am wanting to view consumption over time from my KP115, just like you have, can you point me in the right direction to collect those same logs? Is it a third party app? 
 

much appreciated

  0  
  0  
#6
Options
Re:Energy Consumption Value Jumps (KP115)
2021-09-27 23:04:44

@Jkuc003 Hi, I am using Home Assistant and Grafana to get those graphs. There is a bit of a learning curve to that but if you can get through very rewarding. Hope that puts you in the right direction.

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1011

Replies: 6

About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.