Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link upgrade just worked as expected!
Finally I am able to select the signal source. Thanks!
Just noticed sometimes mobile devices won't connect to nearest deco.
- Copy Link
- Report Inappropriate Content
@RobsonT Same problem in my installation (five Deco M5, one M9plus, connected using ethernet), client. devices are taking too long to switch to closest Deco.
- Copy Link
- Report Inappropriate Content
Hi, the new firmware also allows to manually select the linked Deco.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
Note: This feature is ONLY supported in Mesh networks consisting of ALL Deco's with firmware 1.6.0 installed. And the clients are connected to the HOST NETWORK.
Did you mean after manually selecting the linked Deco, the clients need a long time to switch from the original one to this unit? How long did it take normally?
- Copy Link
- Report Inappropriate Content
@TP-Link Overall I am very satisfied with version 1.6.0. I was having trouble to put Decos to use ethernet infrastructure, but as soon as the New version was installed all Decos connected to the main Deco Using ethernet, no need to configure manually. I noticed the delay in cell phones when moving around my home, with mesh and fast roaming enabled.
Thanks.
- Copy Link
- Report Inappropriate Content
@TP-Link is there an offical release date for this version? not talking about the beta..
- Copy Link
- Report Inappropriate Content
- Wi-Fi Dead-zone Killer—Deco uses a system of units to achieve a whole-home Wi-Fi coverage, Eliminating weak signal areas once and for all
- Seamless Experience—units work together to form a unified network with a single network name, so phones automatically connect to the fastest Deco as your moving, creating a real seamless Wi-Fi experience.
- Copy Link
- Report Inappropriate Content
@TP-Link Another problem, full log of this:
Sun Sep 5 14:58:20 2021 daemon.err client_mgmt: update /tmp/client_mgmt/history_wire_type failed, offline client type recognization of link priority will be influenced.
Sun Sep 5 14:58:37 2021 daemon.err client_mgmt: can not parse json_obj
Sun Sep 5 14:58:37 2021 daemon.err client_mgmt: update_history_wire_type:exit failed.
Sun Sep 5 14:58:37 2021 daemon.err client_mgmt: update /tmp/client_mgmt/history_wire_type failed, offline client type recognization of link priority will be influenced.
Sun Sep 5 14:58:55 2021 daemon.err client_mgmt: can not parse json_obj
Sun Sep 5 14:58:55 2021 daemon.err client_mgmt: update_history_wire_type:exit failed.
Sun Sep 5 14:58:55 2021 daemon.err client_mgmt: update /tmp/client_mgmt/history_wire_type failed, offline client type recognization of link priority will be influenced.
Sun Sep 5 14:59:13 2021 daemon.err client_mgmt: can not parse json_obj
Sun Sep 5 14:59:13 2021 daemon.err client_mgmt: update_history_wire_type:exit failed.
Sun Sep 5 14:59:13 2021 daemon.err client_mgmt: update /tmp/client_mgmt/history_wire_type failed, offline client type recognization of link priority will be influenced.
Sun Sep 5 14:59:31 2021 daemon.err client_mgmt: can not parse json_obj
Sun Sep 5 14:59:31 2021 daemon.err client_mgmt: update_history_wire_type:exit failed.
Sun Sep 5 14:59:31 2021 daemon.err client_mgmt: update /tmp/client_mgmt/history_wire_type failed, offline client type recognization of link priority will be influenced.
Sun Sep 5 14:59:48 2021 daemon.err client_mgmt: can not parse json_obj
Sun Sep 5 14:59:48 2021 daemon.err client_mgmt: update_history_wire_type:exit failed.
Sun Sep 5 14:59:48 2021 daemon.err client_mgmt: update /tmp/client_mgmt/history_wire_type failed, offline client type recognization of link priority will be influenced.
Sun Sep 5 15:00:05 2021 daemon.err client_mgmt: can not parse json_obj
Sun Sep 5 15:00:05 2021 daemon.err client_mgmt: update_history_wire_type:exit failed.
Sun Sep 5 15:00:05 2021 daemon.err client_mgmt: update /tmp/client_mgmt/history_wire_type failed, offline client type recognization of link priority will be influenced.
And sometimes devices didn't connect to the nearest Deco, sometimes Deco App show wireless devices with connection type Wired
- Copy Link
- Report Inappropriate Content
I'm having the same issue as @Lordvader , after selecting a connection preference on multiple devices and after rebooting the deco's and devices, they still connect to the 'nearest or best' deco (not the one I selected).
Is there any way to resolve this?
- Copy Link
- Report Inappropriate Content
This update made me so happy even with their bugs.
Finally I can set which band I want to use with each device.
With this I am now able to use my printer in the same network (2.4 GHz) along with the other devices (5 GHz), no more guest networks.
However I am facing same issue as the community: Devices connecting to another Deco even if I selected an specific one, and also I noticed that devices are taking long time to switch between Deco units.
Thank you!
- Copy Link
- Report Inappropriate Content
anveshj wrote
- Wi-Fi Dead-zone Killer—Deco uses a system of units to achieve a whole-home Wi-Fi coverage, Eliminating weak signal areas once and for all
- Seamless Experience—units work together to form a unified network with a single network name, so phones automatically connect to the fastest Deco as your moving, creating a real seamless Wi-Fi experience.
Hi, did you have any issues with the above statement?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 239834
Replies: 873
Voters 5
