NC450 camera - Connected by cable or wifi restarts every 2 minutes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

NC450 camera - Connected by cable or wifi restarts every 2 minutes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NC450 camera - Connected by cable or wifi restarts every 2 minutes
NC450 camera - Connected by cable or wifi restarts every 2 minutes
2022-11-29 13:34:34 - last edited 2023-01-04 09:31:45
Tags: #nc450
Model: NC450  
Hardware Version: V2
Firmware Version:
I have an NC450 camera for a few years, but recently I noticed that it restarts every 2 minutes or so, in this case the light turns green and after a few minutes the light automatically flashes red (it disconnects and restarts). This only happens when it is connected to the ethernet or wifi network, if there is no internet this does not happen. I tried changing the charger/power supply, I also used Wi-Fi, I also used another ethernet cable, but the behavior remains the same. It currently uses software version 1.5.6 and version hardware v2, I tried to downgrade, but when I put the camera's ip in the browser, it does not open the camera's configuration web. (I also restarted it, and the same thing happens)

 
  0      
  0      
#1
Options
1 Accepted Solution
Re:NC450 camera - Connected by cable or wifi restarts every 2 minutes-Solution
2022-11-30 06:22:46 - last edited 2023-01-04 09:31:45

Hi  @JoshZ 

 

May i know when did this issue happen? There was a problem that cause the loop rebooting of NC450, but it has been resolved yesterday (Nov 29th). *** RESOLVED*** TP-LINK NC450 Security cam wifi , REBOOTING, DISCONNECTING CONSTANTLY ***SOLUTION***

 

Please check what's the status of your camera now? Try to reboot the camera or the router if it does restore automatically. 

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:NC450 camera - Connected by cable or wifi restarts every 2 minutes-Solution
2022-11-30 06:22:46 - last edited 2023-01-04 09:31:45

Hi  @JoshZ 

 

May i know when did this issue happen? There was a problem that cause the loop rebooting of NC450, but it has been resolved yesterday (Nov 29th). *** RESOLVED*** TP-LINK NC450 Security cam wifi , REBOOTING, DISCONNECTING CONSTANTLY ***SOLUTION***

 

Please check what's the status of your camera now? Try to reboot the camera or the router if it does restore automatically. 

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#2
Options
Re:NC450 camera - Connected by cable or wifi restarts every 2 minutes
2022-12-01 13:53:34

  @Wayne-TP  Hello, indeed on November 29 at night the camera worked normally. The problem arose from Saturday November 26 to November 29. But now it is working correctly. Thank you very much for your help

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 315

Replies: 2

Tags

nc450
Related Articles