Smart Home Community > Tapo Smart Hub > Local smart actions on Tapo Hub H200
< Tapo Smart Hub

Local smart actions on Tapo Hub H200

Local smart actions on Tapo Hub H200

Local smart actions on Tapo Hub H200
Local smart actions on Tapo Hub H200
2024-12-20 08:17:32 - last edited 2025-01-12 09:40:59
Model: Tapo H200  
Hardware Version:
Firmware Version:

Does the Tapo team have any plans to add support for Local smart actions to the hub H200?

 

My hub came alongwith the doorbell and I've also paired it with other sensors & buttons.

Now, just to overcome some of the latency issues I'm facing with the S200D rotation action, I'll need to buy another H100 hub, which doesn't make any sense.

 

Please add support for local actions in H200 hub.

  3      
 
  3      
 
#1
Options
2 Accepted Solutions
Re:Local smart actions on Tapo Hub H200-Solution
2025-03-07 10:12:59 - last edited 2025-03-10 03:22:20

  @xcybermail  Yes! Local smart actions are now working on H200 hub. Since my request, I've received two firmware updates supporting this feature. My firmware version is 1.5.0 Build 20250221 rel.59821

Recommended Solution
  1  
  1  
#5
Options
Firmware Release-Solution
2025-03-10 03:22:12 - last edited 2025-03-10 03:22:18
▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#6
Options
7 Reply
Re:Local smart actions on Tapo Hub H200
2024-12-23 06:18:11 - last edited 2025-03-10 03:21:11

  @Hardy13 

 

It's on the way. Ideally the next firmware within the next few weeks.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  1  
  1  
#2
Options
Re:Local smart actions on Tapo Hub H200
2024-12-23 08:50:56

  @Wayne-TP 

 

Thanks for the update. I'm happy to know that. Looking forward to it.

  0  
  0  
#3
Options
Re:Local smart actions on Tapo Hub H200
2025-03-07 05:17:52

  @Hardy13 do local smart actions work on H200 now?

  0  
  0  
#4
Options
Re:Local smart actions on Tapo Hub H200-Solution
2025-03-07 10:12:59 - last edited 2025-03-10 03:22:20

  @xcybermail  Yes! Local smart actions are now working on H200 hub. Since my request, I've received two firmware updates supporting this feature. My firmware version is 1.5.0 Build 20250221 rel.59821

Recommended Solution
  1  
  1  
#5
Options
Firmware Release-Solution
2025-03-10 03:22:12 - last edited 2025-03-10 03:22:18
▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#6
Options
Firmware Release
2025-05-17 10:28:26
Hi there I have same issue with local smart action on h200 Firmware 1.5.1 build 20250228 rel 27505 , no update shows when checking, so it’s latest I have motion sensor t100 I setup an automation to ring the hub when someone walk to the entrance It works fine only when internet connection is good. It doesn’t work at all when interNet isn’t stable The support page says ring action and motion sensor are local compatible It makes no sense if it works only with internet Have tried to reset and resetup both devices multiple times. Any help available? Thanks
  0  
  0  
#7
Options
Firmware Release
2025-05-19 07:19:58

Vtran wrote

Hi there I have same issue with local smart action on h200 Firmware 1.5.1 build 20250228 rel 27505 , no update shows when checking, so it’s latest I have motion sensor t100 I setup an automation to ring the hub when someone walk to the entrance It works fine only when internet connection is good. It doesn’t work at all when interNet isn’t stable The support page says ring action and motion sensor are local compatible It makes no sense if it works only with internet Have tried to reset and resetup both devices multiple times. Any help available? Thanks

  @Vtran 

 

Is your automation marked as a local smart rule? What did you set up? You may share your automation settings here. 

 

Please note that to make this work, the smart device should have a stable wireless connection in the local network, regardless it is a wifi device or a hub-required device, they need to be within the signal range of the hub or the router. 

 

*To check device's signal strength: Device Settings page > Device Info > Signal Strength.

 

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#8
Options

Information

Helpful: 3

Views: 1051

Replies: 7

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.