Thanks for the feedback.

Our support engineer will follow this case with you through email.

Hi i have exactly the same problem, after a couple of hours the camera goes offline, already reset the camera, and the problem persist.

Thanks

tplink wrote

Thanks for the feedback.

Our support engineer will follow this case with you through email.

Did you read the article here?
http://www.tp-link.com/en/faq-911.html

Hello.


After the automated firmware upgrade, the camera has problems, disconnecting randomly after a day. I need to pool out the power and put it back, then it's working again.

I can't be at home to reset everytime the camera, it's useless this way.

Everyhing was fine until last update.

Hello.

I bought the tplink camera nc200 a few months ago and everything worked properly.
I could always connect through my cloud without any problem.

After the automated firmware upgrade, the camera has problems, disconnecting randomly after a day. I need to pool out the power and put it back, then it's working again.

I can't be at home to reset everytime the camera, it's useless this way.

Everyhing was fine until last update.

Please post the message !!!!!!!!

Every other day my cam goes offline - I have to connect it to the router everytime, to reinstall the connection.'
This is realy annoying.

Betina wrote

Every other day my cam goes offline - I have to connect it to the router everytime, to reinstall the connection.'
This is realy annoying.

Same problem here. Ever since the new firmware "update" the cameras have started to act crazy. They go offline randomly and sometimes come back SPONTANEOUSLY and on other times will stay offline UNTIL I power them off then on. This is insane and crazy. Initially I thought my camera was bad but ALL THREE CAMERAS in my house are offline right now (together). This has to be a firmware problem which needs to be rectified NOW. Otherwise these cameras are just a waste.

By the way the problem is with BOTH the iOS app (latest version) and the tplinkcloud.com website

Betina wrote

Every other day my cam goes offline - I have to connect it to the router everytime, to reinstall the connection.'
This is realy annoying.

Same problem here with my 2 cams
Its the Cam(NC200) in some way...
Thought it was signal strength to start with, put one up 3 feet from my router. still disconnects
and thought it was something with lease time(router ip adress), but no !
maybee a bad power supply ? or a "bad" wifi chip used ? could be something in the firmware ?
havent heard people using cable having this problem !

The problem HAS to be the firmware. Why? Because
1. The problem started after the new firmware upgrade
2. It's happening with multiple cameras at the same time. All three of my cameras are brand new bought within a month. So it can't be the camera's wifi chip