@Boribali 

Beta firmware 1.6.1 has been sent to your device, you may check it later in the Tapo app and perform the update.

Boribali wrote

  @Wayne-TP 

Thank you, I have successfully installed the update, now on Android, smart operations will also be local. The p100 connector and the L510 will still only perform smart operations via the Internet.

  @Boribali 

Is this automation triggered by the hub or any sensor? If these two types of devices are not included in the automation trigger, the local smart cannot be created successfully -- cannot run locally.

Thage wrote

  @Wayne-TP 

 

Wayne-TP wrote

Boribali wrote

  @Wayne-TP 

Thank you, I have successfully installed the update, now on Android, smart operations will also be local. The p100 connector and the L510 will still only perform smart operations via the Internet.

  @Boribali 

 

Is this automation triggered by the hub or any sensor? If these two types of devices are not included in the automation trigger, the local smart cannot be created successfully -- cannot run locally.

 

@Wayne-TP  Just out of curiosity ...is this something you guys think might be a future update? Even if its in newer versions of the products? It would be nice, for example, if my Scheduled Actions were also local Smart Actions. In my case my critical Smart Actions are Hub and/or Sensor triggered so I am happy with what I have ...but still, it would be a nice-to-have feature in future.

  @Thage 

We don't have information on the future plans. You may follow the news from the community's official posts or information on our official website.

Boribali wrote

  @Wayne-TP 

 

Similarly, an s200b starts the operations, very simply, for example, if I replace the l530 in a local operation with the L510 or the p100, the pictogram indicating the local operation disappears, and indeed, if the internet is stopped, the automation does not work! Is it possible that certain devices do not support local intelligent operations? (L510, P100, L530v1) at least that's what I experience with these devices.

  @Boribali 

The automation won't run locally if it has not been tagged as 'local smart'. Local Smart requires that all devices in the same automation rule should be connected under the same network (subnet). Additionally, since Local Smart operates under hub control, it won't work if the automation includes devices connected to different hubs. 

Boribali wrote

  @Wayne-TP 

 

I know this too, but my question is, under the same conditions (1 network, 1 hub), why is the L530 or p110,115 local and why is the p100, L510 or L530 v1 not local? In my experience, the devices below do not support local operations, am I right?

  @Boribali 

Well, this does seem normal. Can you send me the Mac address of one of the devices through private message? And include the following information:

1. Your timezone.

2. Reproduce the problem (edit or create a new automation), and record the time of your operation, the devices being used, the name and the configuration of this automation.