D210 keeps showing offline
Hi,
I have had the TP-Link D210 for a few days now and it keeps showing as offline in the Tapo app several times a day at random times. These usually last for a few minutes. Apart from this it is doing everything else as it should be.
When this happens, I check the doorbell and there are no error LED’s showing on the unit, and it in fact records me and I can view the clip when it shows as back online a few minutes later.
I have rebooted a few times but this hasn’t helped and I regularly check the wifi connection which is usually between -58 and -61 RSSI.
Based on browsing the forum, it seems to be a common issue amongst different models so I am guessing a firmware issue?
Any help would be appreciated.
Side note: I also have the C200 a few metres away and it has never shown as offline.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
This thread addresses a specific issue where the Tapo D210 doorbell may appear offline in the app but continues to send detection notifications, and triggers a “Battery Empty” error when attempting to access the live stream. If your Tapo D210 exhibits both of these exact symptoms, please contact our support team directly for assistance. Contact Technical Support
For issues with other device models or different symptoms, please verify what type of disconnection issue your smart device is experiencing. There are three types in general:
- Cloud disconnection: the camera has disconnected from the cloud, it cannot be controlled remotely anymore, but it is still online and manageable in the Tapo app when the mobile device connects to the same local wifi. Camera led usually turns solid orange in this state. *The information indicated by the LED status lights may vary between different device models. For details, refer to the product User Guide. TP-Link Download Center
- WiFi disconnection: the camera has disconnected from the router wifi, this is usually caused by to weak or unstable wifi signal.
- App display issue: The camera always shows offline in the app while the LED remains in the normal state -solid green, and you can still receive detection notifications.
☆ Cloud & WiFi Connectivity Issues
Follow the corresponding suggestions outlined in this article. Cannot use the Tapo app to control my smart devices
*For the wifi disconnection issue, this article also helps. How to check and improve the network connection stability of Tapo smart devices
☆ App Display Issue
a. Ensure the Tapo app is updated. Try to delete and reinstall the app.
b. Make sure the phone has stable internet access. Try using a different network. Disable VPN, ad-blocker app, and other related apps if any.
c. Reload the app homepage. Force-close the app then re-open it.
d. Make tests with different mobile devices, check whether the problem is related to a specific mobile device
- Copy Link
- Report Inappropriate Content
Wayne-TP wrote
This thread addresses a specific issue where the Tapo D210 doorbell may appear offline in the app but continues to send detection notifications, and triggers a “Battery Empty” error when attempting to access the live stream. If your Tapo D210 exhibits both of these exact symptoms, please contact our support team directly for assistance. Contact Technical Support
For issues with other device models or different symptoms, please verify what type of disconnection issue your smart device is experiencing. There are three types in general:
- Cloud disconnection: the camera has disconnected from the cloud, it cannot be controlled remotely anymore, but it is still online and manageable in the Tapo app when the mobile device connects to the same local wifi. Camera led usually turns solid orange in this state. *The information indicated by the LED status lights may vary between different device models. For details, refer to the product User Guide. TP-Link Download Center
- WiFi disconnection: the camera has disconnected from the router wifi, this is usually caused by to weak or unstable wifi signal.
- App display issue: The camera always shows offline in the app while the LED remains in the normal state -solid green, and you can still receive detection notifications.
☆ Cloud & WiFi Connectivity Issues
Follow the corresponding suggestions outlined in this article. Cannot use the Tapo app to control my smart devices
*For the wifi disconnection issue, this article also helps. How to check and improve the network connection stability of Tapo smart devices
☆ App Display Issue
a. Ensure the Tapo app is updated. Try to delete and reinstall the app.
b. Make sure the phone has stable internet access. Try using a different network. Disable VPN, ad-blocker app, and other related apps if any.
c. Reload the app homepage. Force-close the app then re-open it.
d. Make tests with different mobile devices, check whether the problem is related to a specific mobile device
@Bullet1968 @godan The guidance above should help with your case, FYI.
@Bullet1968 For privacy concerns, we do not recommend posting personal information like device's Mac address on public platform. You can edit your post to remove that information.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
sent mine back under warrently RMS -
fixed the issue, and the new one hasn't had any problems at all.
- Copy Link
- Report Inappropriate Content
@godan
https://myproducts.tp-link.com/uk/login
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1957
Replies: 28
Voters 0
No one has voted for it yet.