Smart Home Community > Tapo Smart Hub > Record Hub H200 Tapo Cam C200
< Tapo Smart Hub

Record Hub H200 Tapo Cam C200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Record Hub H200 Tapo Cam C200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Record Hub H200 Tapo Cam C200
Record Hub H200 Tapo Cam C200
2025-06-14 09:37:54 - last edited 2025-07-14 11:37:45
Model: Tapo H200  
Hardware Version: V1
Firmware Version: 1.5.1

I want to see the recordings that are made on a 128 GB card in the H 200 hub. When it starts to play, it looks perfect, but every minute or two minutes at the most, it says that there is no recording. Instead, I move the bar to the next minute and I can play another two minutes until it says again that there is no recording. If I want to see a recording that is more than five hours old, it is impossible.

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Record Hub H200 Tapo Cam C200-Solution
2025-06-16 06:34:00 - last edited 2025-07-14 11:37:45

  @Flick-2000 

 

Check the signal strength of the H200 hub and the camera, if the signal is too weak, it might affect the recording. How to check and improve the network connection stability of Tapo smart devices

 

You can try to format the SD card.

 

What's the hardware and firmware version of your Tapo C200? Is it the only camera that stores videos to the hub? If there are other cameras, are they having the same problem?

 

What's the version of your Tapo app? Try to watch the videos on another phone or tablet, check if the problem still exists.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Record Hub H200 Tapo Cam C200-Solution
2025-06-16 06:34:00 - last edited 2025-07-14 11:37:45

  @Flick-2000 

 

Check the signal strength of the H200 hub and the camera, if the signal is too weak, it might affect the recording. How to check and improve the network connection stability of Tapo smart devices

 

You can try to format the SD card.

 

What's the hardware and firmware version of your Tapo C200? Is it the only camera that stores videos to the hub? If there are other cameras, are they having the same problem?

 

What's the version of your Tapo app? Try to watch the videos on another phone or tablet, check if the problem still exists.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 422

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.