P100 forgets Default State setting
I have several P100 and P110s. Some have died, but this is a new problem. If I set the Default State to Off (or On) it reverts back to Last "On" State as soon as I leave the menu. Tried a reset but the same. Any ideas?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Make sure your Tapo app is updated. You may try to delete and reinstall the app.
- Ensure device's firmware is up to date as well. How to update the firmware of the Tapo devices on the Tapo App
- Do not enable VPN while using the Tapo app.
- Try to manage the plug on another phone or tablet, see if the same occurs.
If the situation still persists, reproduce the problem then submit a log in the app to the support team for follow up. How to get the log of Tapo app
- Copy Link
- Report Inappropriate Content
- Make sure your Tapo app is updated. You may try to delete and reinstall the app.
- Ensure device's firmware is up to date as well. How to update the firmware of the Tapo devices on the Tapo App
- Do not enable VPN while using the Tapo app.
- Try to manage the plug on another phone or tablet, see if the same occurs.
If the situation still persists, reproduce the problem then submit a log in the app to the support team for follow up. How to get the log of Tapo app
- Copy Link
- Report Inappropriate Content
@Wayne-TP Thanks for your reply. I can confirm that the plug has upto date firmware and an app reinstall gives the same problem. The error ocurrs on both my iPhone and iPad. As for sending logs, there is no option to select technical support on the work flow. I went back and selected the camera as detailed in the guide and even that doesn't match what I'm seeing.
- Copy Link
- Report Inappropriate Content
Pinter97 wrote
@Wayne-TP Thanks for your reply. I can confirm that the plug has upto date firmware and an app reinstall gives the same problem. The error ocurrs on both my iPhone and iPad. As for sending logs, there is no option to select technical support on the work flow. I went back and selected the camera as detailed in the guide and even that doesn't match what I'm seeing.
Click to view any FAQ, scroll down to the bottom, and hit Contact Technical Support -- Email support.
To assist with this case, a specialist will help to follow it up through email. Please check your inbox later to confirm. If the email you used to register for the TP-Link community is not your contact email or you cannot access it, please send me your contact email through private message.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 394
Replies: 3
Voters 0
No one has voted for it yet.