Live Stream Paused
Live Stream Paused
I have 3 x C225 and 1 x C520 cameras connected to my H500. I keep getting this message on all 4 cameras on the HDMI output of the H500:
Live Stream Paused.
Battery-powered cameras only start mirroring when an event is
detected. If AI Detection is disabled, mirroring will be deactivated.
None of the cameras are battery powered - they all run on the supplied AC-DC adapter.
The video stream on the Android app is not interrupted while the H500 is saying it is paused.
I think the duty cycle of off to on is about 50% so the H500 is pretty well unusable which is a pity as I only bought it to monitor my cameras from a spare HDMI monitor. At the moment I spend more time looking at the messages than any useful picture - usually 2 of the 4 are off at any given point in time.
Is this a known issue & will it be fixed with a firmware update?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Signing on to this as well.
H500. 3 continuous stream cameras and 1 doorbell. I output the HDMI on the H500 to an LCD panel. I frequently get video dropoutsd with the "Live stream paused" message. I've reconfigured my network. I've optimized my network. I've moved APs. I've reduced the resolution to 720P. Nothing improves it.
I can always stream a single camera to my phone. It's not stuttery and it doesn't drop out.
TP-Link: You need to fix this.
- Copy Link
- Report Inappropriate Content
Regarding the issue discussed in this thread, please check the suggestions in this article for troubleshooting, specifically, refer to 'Scenario 2: Black Screen or "Live Stream Paused" During Screen Mirroring': How to troubleshoot if Tapo H500 Screen Mirror feature malfunctions
If you still experience trouble in streaming the camera live feed continuously via screen mirroring (HDMI), this solution might be just what you need, check it out! Optimizing HDMI Output for Tapo H500: Better Screen Mirroring for Tapo AC-Powered Cameras/Doorbells
- Copy Link
- Report Inappropriate Content
Ciao @Dave665 la mia sensazione è che se si usano più dashboard al passaggio da una dashboard all'altra causa più frequentemente il problema.
Poi ho notato che alcune telecamere periodicamente iniziano a dare questo problema, ma basta riavviarle e il problema per un po sparisce o si attenua.
Onestamente non ho capito cosa si risolve con il riavvio, non avendo un log.
Sicuramente è un po limitante restare fermo su una dashboard a 4 telecamere se hai più di 4 telecamere.
Forse serebbe utile risolvere il problema del passaggio a nuove dashboard o eventualmente fare in modo di visualizzare più di 4 telecamere.
Grazie
Comunque do un occhiata al link che mi hai passagto
Grazie ancora
- Copy Link
- Report Inappropriate Content
Respectfully, that's not a solution. That is a collection of tips, but none that will resolve this issue.
I moved from the 4 camera display to a carousel setup and only see the occasional paused screen. Seems like a bandwidth issue in the H500 video hardware.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 834
Replies: 14
Voters 0
No one has voted for it yet.