I have just moved in to a house that the previous owner had a couple of cameras fitted, I have added some additional cameras, a doorbell and hub and switches and the below are features I feel would be useful.

I know there is the Home and Away mode but they don't see customisable enough and don't seem to take advantage of geofencing to activate/deactivate.

For example, I would like to set

Person A and Person B leave home, all cameras record and notify of detection

Person A and/or Person B at home during programmed times i.e daytime, all cameras record but notifications are disabled on some cameras but not others.

Person A and/or B at home during programmed times overnight all cameras notify of detection

There is no need for my garden cameras to notify us every time one of us steps outside but I still want notifying of detection at the front door.

For the doorbell if one or both people are at home disable the call to the phones and use the chime only. There is no point in 2 phones ringing and the chime going off if somebody is home, similarly if Person A is out and Person B home why does Person A's phone need to ring.

For things like switch activation these could be automated too, for example

Person A, a car driver, is away from home in the evening, when they get home it could activate the switches controlling my garage lights for parking.

Person B, a none driver doesn't need to activate the switches when returning home.

There are many more uses that a customisable geofencing solution could control based on the actions by either person A, person B or both.

Thanks