Smart Home Community > Tapo Smart Plug > What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
< Tapo Smart Plug

Solution What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?

12

Solution What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?

SolutionWhat to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
3 weeks ago - last edited 3 weeks ago
Tags: #Device Connectivity
Model: Tapo P110  
Hardware Version: V1
Firmware Version: 1.3.4 Build 250403 Rel.150504

This Article Applies To

Tapo P110 (AU/FR/UK/EU) V1.0 - Firmware 1.3.4 Build 250403 Rel.150504

 

Description

On a Tapo P110 V1 with firmware 1.3.4 Build 250403 Rel.150504, you may find the smart plug disconnects unexpectedly while the LED turns to blinking amber and green. And a reconfiguration is required to add the smart plug back to the app.

 

 

Solution

Relevant modifications will be added in the future firmware version.

 

Currently, a beta firmware is available for community users to address this issue. If you would like to try it out, follow the instructions below to apply the beta.

 

How to Apply Beta Firmware?

1. Check the Mac address of your Tapo smart plug.

2. Send a private message to @Wayne-TP with the following information:

[ID 840104][Tapo P110 V1 1.3.4 Auto Reset] + Mac address of your Tapo P110

 

Before the Upgrade:
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) How to update the firmware of the Tapo devices on the Tapo App
(3) Firmware downgrade is not supported. When a new official version is released, updating it will overwrite the beta version.

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  1      
 
  1      
 
#1
Options
14 Reply
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
2 weeks ago

@Slavov  @QuestionReality 

 

Beta firmware 1.3.4 Build 250527 Rel.110651 has been sent to your devices. You may check it later in the Tapo app and perform the update.

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#2
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
2 weeks ago - last edited 2 weeks ago

Wayne-TP wrote

@Slavov  @QuestionReality 

 

Beta firmware 1.3.4 Build 250527 Rel.110651 has been sent to your devices. You may check it later in the Tapo app and perform the update.

  @Wayne-TP 

 

Many thanks. Beta Firmware installed OK. I will monitor for any further disconnections (LED blinking amber and green).

  0  
  0  
#3
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
2 weeks ago

  @Wayne-TP This is happening with all my Tapo P110 plugs. Will there be a full firmware update soon instead of the beta? Thanks. 

  0  
  0  
#4
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
2 weeks ago

RoryP wrote

  @Wayne-TP This is happening with all my Tapo P110 plugs. Will there be a full firmware update soon instead of the beta? Thanks. 

  @RoryP 

 

We don't have information about the release plan. You may keep an eye on the new firmware notices on your device. Or follow information on the TP-Link official website > product's Support page > Firmware Release Note section. TP-Link Download Center

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#5
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
2 weeks ago

@vk1913  @MarekSchor  Beta firmware has been sent to your devices. You may check it later in the Tapo app and perform the update.

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  1  
  1  
#6
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
Saturday

  @Wayne-TP I sent my IP about a week ago, but the update has not arrived.  Did I do something wrong?

  0  
  0  
#7
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
Sunday

  @Wayne-TP hi wayne.

 

I messaged you my mac addresses. Can you confirm you received them?

 

Thanks

  0  
  0  
#8
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
Monday

@tpasta  @Gambler72 

Beta firmware has been sent to your device, you may check it later in your Tapo app and perform the update.

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#9
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
Monday

  @Incredible-Bulk  No message arrived.

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#10
Options
Re:What to do if Tapo P110 V1 1.3.4 requires reconfiguration frequently (LED blinking amber and green)?
Tuesday

@Savo_1  Beta firmware has been sent to your device, you may check it later in the Tapo app and perform the update.

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#11
Options
12

Information

Helpful: 1

Views: 522

Replies: 14

Tags

Device Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.