Smart Home Community > Tapo Smart Hub > H100 won't sound when second motion sensor is triggered
< Tapo Smart Hub

H100 won't sound when second motion sensor is triggered

H100 won't sound when second motion sensor is triggered

H100 won't sound when second motion sensor is triggered
H100 won't sound when second motion sensor is triggered
2025-09-24 07:47:00 - last edited a week ago
Tags: #Tapo App Related
Model: Tapo H100  
Hardware Version: V1
Firmware Version: 1.5.23 Build 241106 Rel.093525

I already had the Smart Hub H100 and 1 motion sensor T100 connected.  They are working fine as expected.

 

I purchased a second motion sensor, T100, and connected it to the Smart Hub H100. The Tapo app showed that the second sensor is connected.  However, the Hub will not sound when motion is detected by the second sensor. But the chime works when motion is detected by the first motion sensor.

 

How do I make the Hub chime when motion is detected by the second sensor.

 

Thanks

Mark

 

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:H100 won't sound when second motion sensor is triggered-Solution
2025-09-24 09:53:54 - last edited a week ago
Found it. Go to the Motion Sensor, [Settings], [Smart Action], [Automation] ......
Recommended Solution
  1  
  1  
#2
Options
Re:H100 won't sound when second motion sensor is triggered-Solution
2025-09-25 03:21:41 - last edited a week ago

Marko2025 wrote

Found it. Go to the Motion Sensor, [Settings], [Smart Action], [Automation] ......

  @Marko2025 

 

Actually, you can add this new sensor to the existing automation, rather than create a new one. On the app homepage, go to the Smart tab, then click automation. Here, you can find and manage all the created automations.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:H100 won't sound when second motion sensor is triggered-Solution
2025-09-24 09:53:54 - last edited a week ago
Found it. Go to the Motion Sensor, [Settings], [Smart Action], [Automation] ......
Recommended Solution
  1  
  1  
#2
Options
Re:H100 won't sound when second motion sensor is triggered-Solution
2025-09-25 03:21:41 - last edited a week ago

Marko2025 wrote

Found it. Go to the Motion Sensor, [Settings], [Smart Action], [Automation] ......

  @Marko2025 

 

Actually, you can add this new sensor to the existing automation, rather than create a new one. On the app homepage, go to the Smart tab, then click automation. Here, you can find and manage all the created automations.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 220

Replies: 2

Tags

Tapo App Related
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.