TAPO D230
Hi,
not sure which hardware version I have.
I have setup this doorbel - with H200 hub - works fine, and quick.
However;
When I leave the house, it sometimes takes very long to send a notification that there is movement. And sometimes it doesnt send anything at all.
I have tried different settings;
People detection, movement detection - even different zones. Sensitivity way up. Even active mode; balanced or high performance.
the notification just comes in very late, or none at all.
Is there something I am missing here ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If the doorbell is positioned directly facing the entrance where people walk straight towards it, this type of movement cannot wake up the doorbell effectively. Consequently, the doorbell may respond late or even fail to activate, resulting in delayed detections/notifications or no detections/notifications at all.
You may check this article to learn about How to Install and Configure Battery-Powered Cameras for Optimal Detection Performance.
- Copy Link
- Report Inappropriate Content
If the doorbell is positioned directly facing the entrance where people walk straight towards it, this type of movement cannot wake up the doorbell effectively. Consequently, the doorbell may respond late or even fail to activate, resulting in delayed detections/notifications or no detections/notifications at all.
You may check this article to learn about How to Install and Configure Battery-Powered Cameras for Optimal Detection Performance.
- Copy Link
- Report Inappropriate Content
Thanks ! I have read that article.
The situation here in the Netherlands is that almost every door has a straight path towards it - so logically you place the doorbell next to the door so that it always faces straight down the path.
So there any other options I can use ? Does it needs to be installed with the wedge for a small angle ?
thanks again
- Copy Link
- Report Inappropriate Content
Using a wedge to adjust the angle of the doorbell camera may be helpful. I recommend testing it yourself, as the actual results may vary depending on the specific usage scenario.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 129
Replies: 3
Voters 0
No one has voted for it yet.