When enabling qos the loaded latency increase
I’m using the TP-Link Archer AX53 Indian Version (Hardware V1.8) and noticed that the WebUI does not include any QoS settings, even though QoS is available in the TP-Link Tether app. When I enable QoS through the app, the connection becomes unstable — my loaded latency jumps from the usual 40 to 60 ms but when i enable qos the loaded latency goesto 120–225 ms, making it unusable for gaming and other real-time tasks. Without QoS, the router performs normally. Since QoS is an important feature for managing bandwidth and ensuring stable latency, please add full QoS controls directly to the WebUI and improve its stability on the AX53 Indian variant. This would greatly enhance usability and performance for many users. I have a archer c6 that have better loaded latencyof 5ms
i am sharing the results too in link
https://drive.google.com/drive/folders/1dRKABRvPSo46ISY1eZPJnb2bnNksIT7D
https://drive.google.com/file/d/1NHfNZqD2gB6dUmfZnR7RQ3kr4QknGrgR/view?usp=drivesdk
https://drive.google.com/file/d/19-6gRzzMU7DK0G9WDWD2t9oEtWuQTNBS/view?usp=drivesdk
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Pankajuuuuu ... This is with qos wtf? Why am i getting higher upload than my plan allows??? And speedtest.net also shows between 150-167..
- Copy Link
- Report Inappropriate Content
@Harutolist, I suspect a potential issue with your Internet Service Provider. My current service agreement terminates on January 2nd, at which point I will be upgrading to the 150 Mbps symmetrical plan. This upgrade will allow me to definitively evaluate the router's capability to support that speed, as 300 Mbps substantially exceeds my current usage requirements. As 5G is complimentary in our country with a 4G plan, I achieve download speeds of 700 to 800 Mbps with that.
Incidentally, what is your monthly cost for the 300 Mbps down and 150 Mbps up service?
- Copy Link
- Report Inappropriate Content
@Pankajuuuuu it's not too much, it's around..17.29 ron without the tv subscription included from the same provider, obviously. With it included in the bill, it's around..38.64 ron
- Copy Link
- Report Inappropriate Content
@Harutolist and i use digi, one of the best providers in romania
- Copy Link
- Report Inappropriate Content
@Joseph-TP sort of upgraded to a different isp plan.. and now i get this with qos on, and i am using the beta firmware; the upload latency is stable regardless from what i had noticed, but download one always tends to be high
- Copy Link
- Report Inappropriate Content
@Harutolist download 10 ms is actually good and unload latency depends on the server distance
- Copy Link
- Report Inappropriate Content
@Pankajuuuuu I mean... yeah, but it's not always like that, sometimes it hits 20ms when downloading.. and i'd prefer way lower for gaming since i am a gamer and require ultra low latency..
- Copy Link
- Report Inappropriate Content
Thanks for @Pankajuuuuu 's suggestions.
@Harutolist , As a comparative test, what would happen if the PC bypassed the router and connected directly to the front-end modem, and then ran Speedtest?
If you disable QoS, would the router latency be below 10ms?
- Copy Link
- Report Inappropriate Content
@Joseph-TP Without qos tests:
Number 1:
Number 2:
And as for the test which includes router bypass, the connection is even worse. Not only it increases the latency by 50+ but also makes my device lag and freeze, whereas if not bypassed, there's no lag because the router is much better at handling connection
- Copy Link
- Report Inappropriate Content
Hello @Harutolist ,
We would like to escalate your case to the support engineers, and they will follow up on it. If you are willing to conduct further analysis, please check your inbox and respond.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 1079
Replies: 42
Voters 1