Smart Home Community > Tapo Smart Hub > How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
< Tapo Smart Hub

Solution How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive

Solution How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive

SolutionHow to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
2025-12-30 12:06:27 - last edited Yesterday
Tags: #Smart Actions
Model: Tapo H100   Tapo H200   Tapo H500  
Hardware Version:
Firmware Version:

This Article Applies To

Tapo devices and configurations that follow Tapo Local Smart rules.

 

*Automations under Tapo H110's control aren't affected.

 

Description

Recently, you may have noticed that some Tapo devices are unable to create Local Smart rules successfully, even when the devices and settings meet the creation requirements. Alternatively, previously created Local Smart rules may have suddenly become inactive, with the house icon no longer displayed.

 

Before you go further, make sure your setup follows the rules for Local Smart. If the devices or rules configured do not comply with the requirements, failure to create the automation is expected behavior.

1. Supported Firmware: The Tapo hub's firmware must support this feature. *The latest firmware for Tapo models H100, H110, H200, and H500 all support local smart automation. Update your Tapo hub if it is not in the latest version. How to update the firmware of the Tapo devices on the Tapo App

2. Compatible Devices & automation skills: The trigger and action devices and the selected skills must be of a supported type for Tapo Local Smart. If you select an unsupported device type or skill, the automation will not qualify for local smart creation. 

▷ Check this FAQ to verify your setup: What is Local Smart Action?

3. Same Hub and Network Subnet: All selected devices in the same automation must be sub-devices under the same Tapo hub. Additionally, Wi-Fi devices should be on the same subnet as the hub. Local smart automation cannot be created if you include a device from a different Tapo hub or a Wi-Fi device from a different subnet.

 

Workaround

Our R&D team has provided beta firmware that can address this issue. If you would like to test it out, refer to the steps below to apply the beta firmware.

 

How to Apply Beta Firmware

1. Find the Mac address of your Tapo hub: Open the Tapo app and navigate to the smart hub's Device Settings page > Device Info.

2. Send a private message to @Wayne-TP with this format: [ID 853096][Tapo Local Smart Creation Failure] + Model & Mac address of the Tapo hub

 

02/11/2026 Update: For beta firmware requests over the coming two weeks, please reach out to your local support team for prompt assistance. Contact Technical Support  While you may still contact @Wayne-TP  directly, please note that responses could take 5‑7 business days. To ensure timely access and avoid disruption, we encourage you to use the designated support channel for beta firmware applications.

 

To receive efficient follow-up, please include the following information in your email:

1. A brief summary of the product issue you encountered, along with your request for beta firmware. *You may also include a link to this community post for the support team’s reference.

2. Model and the Mac address of your Tapo hub.

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) How to update the firmware of the Tapo devices on the Tapo App
(3) Firmware downgrade is not supported. When a new official version is released, updating it will overwrite the beta version.

 

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  1      
 
  1      
 
#1
Options
9 Reply
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
2026-01-05 05:04:35 - last edited 2026-01-09 14:18:53

  @Wayne-TP 

 

H100 updated well. Anyway, is it that version with added matter 1.3, or not yet?

 

Edit: I see now, yes, it is matter 1.3, water leaks sensors are exposed now, but buttons are still not exposed.

 

The button could be easily exposed. When pressing the button, it's a single press, and for the scroll wheel, it could be a temporary workaround like with the IKEA Bilresa scroll, when rotating clockwise, it's exposed as a single press, and when rotating right, it's exposed as single press.

  0  
  0  
#2
Options
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
2026-01-08 02:15:20

SugarBaby wrote

  @Wayne-TP 

 

H100 updated well. Anyway, is it that version with added matter 1.3, or not yet?

 

Edit: I see now, yes it is matter 1.3, water leaks sensors are exposed now, but buttons are still not exposed.

 

Button could be easily exposed, when pressing button it's single press, and for scroll wheel it could be temporary workaround like with IKEA Bilresa scroll, when rotating clockwise it's exposed as single press, and when rotating right it's exposed as single press.

 

h200 won't update, videos:

1. https://drive.google.com/file/d/1wsWeB-iqjaDkWlzHjMmD_BBu7acxOCbp/view?usp=drivesdk

 

2. https://drive.google.com/file/d/1Gv9THn5-m5Y9Mnz4OWvJGevn5zGGkIna/view?usp=drivesdk

@SugarBaby 

 

Your H200 is in the beta version. As for the update prompt, you can simply ignore it.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  1  
  1  
#3
Options
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
2026-01-08 11:48:24 - last edited 2026-01-09 14:19:35

  @Wayne-TP 

 

Oh, you are right, thanks for the clarification.

 

Anyway, here important changes for h200 hub, if anyone is interested.

H200 hub finally supports multiple triggers as local automation.

Now, if you put conditions in "IF"  it will be local automation as well!

H200 hub finally support ring the hub action as local automation.

Now I can move all my subghz devices to h200 hub.

 

Photos, it's fully local automation now:

 

  0  
  0  
#4
Options
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
2026-01-08 12:04:42

@DimitrisB @AndrewBasically  Beta firmware 1.7.1 Build 251209 Rel.202921 has been sent to your device, you may check it later in the Tapo app and perform the update.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
  0  
#5
Options
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
2026-01-12 01:53:28

@uncool_dude  Beta firmware has been sent to your device, you may check it 30 minutes later in the Tapo app and perform the update.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
  0  
#6
Options
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
3 weeks ago

@tiptap Beta firmware has been sent to your device, you may check it 30 minutes later in the Tapo app and perform the update.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
  0  
#7
Options
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
2 weeks ago

@UfukA  Beta firmware has been sent to your device, you may check it 30 minutes later in the Tapo app and perform the update.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
  0  
#8
Options
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
Monday

@menostar @Stewart46  Beta firmware has been sent to your device, you may check it 30 minutes later in the Tapo app and perform the update.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
  0  
#10
Options
Re:How to Fix: Tapo Local Smart Action Not Creating or Unexpectedly Inactive
Yesterday

@clockscar1  Beta firmware has been sent to your device, you may check it 30 minutes later in the Tapo app and perform the update.

▶ CES 2026 Meet TP-Link AI Assistant and More New Products!
  0  
  0  
#11
Options

Information

Helpful: 1

Views: 735

Replies: 9

Tags

Smart Actions
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.