Troubleshooting Tapo D210/TD21 Won't Wake Up Unless Watching Liveview in the Tapo App
This Article Applies To
Tapo D210(US/EU/JP/KP) V1.0
TD21(US/UK) V1.0
Description
Recently, you might have noticed that the Tapo D210 V1 or TD21 V1 doorbell has stopped detecting motion or recording events, except when you are watching the live stream in the Tapo app, where detection and recording work normally.
Troubleshooting Guide
Set the doorbell's detection sensitivity to the maximum level, then run the detection-range test on your doorbell. *We recommend conducting multiple tests to avoid coincidental or inconsistent results. How to test the detection range of Tapo battery camera
If the doorbell cannot detect anything during testing, or if the detection range is noticeably limited—for example, within just 1–2 meters, the issue is likely hardware‑related, specifically with the PIR sensor. In this case, a replacement will be needed. To proceed with the warranty, please contact the retailer or local TP-Link support. Contact Technical Support
For other cases, please contact technical support for further investigation.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, my tapo d210 only records when app is open, ive done detection test and changed settings but still wont record, any help please
- Copy Link
- Report Inappropriate Content
As this thread suggested, please contact your local TP-Link support team to assist with this matter. Contact Technical Support
- Copy Link
- Report Inappropriate Content
@Wayne-TP Hi,
Hope you are doing well!
my Tapo D210 has the same problem, it was fine for first week and then this issue.
tried reset / reboot multiple times.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 5403
Replies: 74
Voters 1
