Topography:

T315/T310 > H200 > EAP110-Outdoor > TL-PA7017PKIT > Deco X50 > Internet.

Problem:

Having fitted two T315 and one T310 to the above network, the app will not refresh the temperature and humidity measurements until I tap through to the graphs, which appear to have updated.

However, automations to turn heaters on via Tapo P110 are working in a timely manner. Only the tiles on the app do not update or refresh.

This is on all three sensors.

Additional info:

I have several additional T315/T310 inside the house controlling the temperature on KASA KE100s. These are connected to one of four Deco X55/X60 via a KASA hub. These update on the app immediately.

Prior to adding the three T315/T310, I used an X50-Outdoor (topography as above except I replaced an H100 with an H200). The sensors refreshed perfectly through this topography. However, I needed additional reach for outfdoor cameras and the EAP110 improved the range. 

I would rather not reintroduce the X50-Outdoor.

All sensors, hubs, APs and Decos have the latest firmware.

It appears to be an issue with either the H200 or the EAP110-Outdoor as these are the only parts I have changed. 

Any assistance would be gratefully received.