Firmware Too Weak

Firmware Too Weak

Firmware Too Weak
Firmware Too Weak
a week ago - last edited 2 hours ago
Model: XX530v  
Hardware Version: V1
Firmware Version: 0.7.0 3.0.0 v6069

I have recently bought a TPlink xx530v to replace the JioRouter which was extremely restrictive. Setup was an easy process and everything works fine.

 

However, everything works fine except for QoS. One of the main reasons I bought xx530v was to use QoS and reduce bufferbloat for better cloud gaming experience without needing to buy a separate modem.

 

Currently only global upload speed can be limited, no limit can be configured for specific connected devices.

Upon reducing the global upload speed, instead of reducing the upload ping, it dramatically increases the upload ping!

 

All other TPlink home wifi routers (Archer series) with Tether app support have such nice bandwidth/QoS controls.

It is understandable because those routers have been produced by TPlink since ages and Tether app was released long back in 2013.

Whereas TPlink has only recently started making ISP routers like xx530v compatible with Aginet app (also recently released in 2022) probably because of their increased demand due to rise of National ISPs like Jio and Airtel in home internet.

 

This post is a request for bringing proper full featured QoS/Bandwidth control options to xx530v which is expensive and capable enough to have the feature. The QoS/Bandwidth control feature should be properly implemented to actually reduce upload and download ping (bufferbloat) and make multiple users use the internet in a way that does not bother other clients.

 

With current lack of QoS and bandwidth control the OFDMA and MU-MIMO feature is useless. Even Asus RT-AC53 with Asus WRT has much much better proper granular Qos and Bandwidth control, it can handle more clients much better despite being wifi 5 router lacking OFDMA feature.

  2      
2
#1
Options
1 Reply
Re:Firmware Too Weak
2 hours ago

Hello @Regulus252 

 

Thank you for posting on the TP-Link Community.

 

Are you requesting a similar bandwidth control/speed limit feature as introduced to some Archer routers like AX55?

https://community.tp-link.com/en/home/forum/topic/710892

 

Could you please show me a screenshot of the current QoS settings on your XX530v?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router! Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
0
#2
Options