Tapo P100 default status ON

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tapo P100 default status ON

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tapo P100 default status ON
Tapo P100 default status ON
2020-07-03 05:55:16 - last edited 2021-09-03 08:09:05
Model: Tapo P100  
Hardware Version: V1
Firmware Version:

Hi,

 

When power goes down, the default state of the P100 is OFF. I'd like to set the p100 in a way when if a power cut, the default state is ON when power comes back. Is this possible?

 

Thanks.

  6      
  6      
#1
Options
2 Accepted Solutions
Re:Tapo P100 default status ON-Solution
2021-06-24 01:39:33 - last edited 2021-09-03 07:59:48

Hello everyone,
Thank you for your feedback and patience!  Set the power state of Tapo plug is Now available for some TAPO models.

You could find the latest information about this feature from here: 
[Tapo Plug] Set Default State after Power Failure is Now Available (Tapo P100 V1.2 / P110)
https://community.tp-link.com/en/smart-home/forum/topic/275292


Please leave the Hardware version and Country version (UK/ EU etc.) of your device there if you require the same feature,  we would record your feedback for further evaluation, thank you for your understanding.

Recommended Solution
  0  
  0  
#17
Options
Re:Tapo P100 default status ON-Solution
2021-07-25 21:00:59 - last edited 2021-08-04 01:29:17

I already received the firmware with this feature, tested and it works! Thanks for earing us Tapo.

 

Firmware version is 1.4.9

Recommended Solution
  0  
  0  
#19
Options
34 Reply
Re:Tapo P100 default status ON
2020-08-31 15:57:19

@Ploping 

I also have this trouble. After the power is restored, I hope that the P100 will be turned on.

  1  
  1  
#3
Options
Re:Tapo P100 default status ON
2020-10-26 05:20:39
I have 3 P100s and they all seem to be ON by default. I prefer them to be OFF for safety purposes. One of my plugs is connected to a water heater and i would hate it to turn ON automatically, say after an unexpected power interruption. When can we expect a CONFIGURABLE DEFAULT STATE? thank you
  1  
  1  
#4
Options
Re:Tapo P100 default status ON
2021-02-03 20:07:01

Please have a configurable on/off state after a power cut , as mine control my poe switches 

  2  
  2  
#5
Options
Re:Tapo P100 default status ON
2021-03-16 12:44:44

@Brook 

 

Any good news? About last power state implementation? I am waiting too

  1  
  1  
#6
Options
Re:Tapo P100 default status ON
2021-04-21 17:09:43

@Ploping I'd also like this feature. 

  0  
  0  
#7
Options
Re:Tapo P100 default status ON
2021-04-28 08:12:20
Almost 1 year has passed. How is this development?
  0  
  0  
#8
Options
Re:Tapo P100 default status ON
2021-05-11 13:12:22

@Brook 

I would also vote for this just missed recordings as we had a powercut and the default was off so the sky box didnt come back on, please fix like Philips do with their system.

  0  
  0  
#9
Options
Re:Tapo P100 default status ON
2021-05-30 08:57:28
Сделайте уже эту чёртову функцию!
  0  
  0  
#10
Options
Re:Tapo P100 default status ON
2021-06-02 09:42:40

@DobroFenix 

Hi, Thank you very much for all the feedback.

It has been planned to optimize this feature on the later firmware upgrade.

 

  0  
  0  
#11
Options
Re:Tapo P100 default status ON
2021-06-02 09:44:54

@Solla-topee 

 

Hi. Good news. When will it be available?

  0  
  0  
#12
Options

Information

Helpful: 6

Views: 7894

Replies: 34

Related Articles