Before I only updated the version, there was no difference in performance, all good. But now that I am with (low upload and high traffic) I have noticed all these problems, I can not even reproduce the motion detection on the farthest c100 camera  the captured video is frozen.

On the other hand, if I go back in version (until 2.3.33) everything is solved.

I don't use repeater mode, all wired. All APs are tplink from android 10 samsung galaxy the app connects from an AP to 2 other APs where the cameras are connected. 

Message "cannot be controlled locally" appeared only in farthest c100. Sometimes only when opening the app a message appeared above: unstable network had to be refreshed so that cameras appear.

alvaro123 wrote

I have 2 c200 and 3 c100. I installed the latest version of the app 2.4.16 and an unstable network message appears constantly and the message "cannot be controlled locally" appears on the c100, I do not have notification activated. I have returned to version 2.3.36 which works fast and perfect. I hope it will be solved soon. Thks

I turned off the automatic powerline frequency and the network stability issues apepar to have gone away. (Two C200s, both bought at the same time, but only one was showing the issue.)

Go into setting for the camera, then Advanced Setting, Powerline Frequency. As I'm in North America, I've set it to 60Hz. Europe would (generally) be 50Hz.