Unable to view camera over Mobile network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Viewing over the home WiFi network, in which the Camera is , is good.
However when tried to view over Mobile network it does not work and keeps waiting. Right now the Camera is connected over an extender and it has to work in that location only.
I have seen many such complaints on this forum but apart from the check router / reset / check signal / change DNS and some such basic remedies nothing tangible seem to be there.
In fact if the Camera does not work over mobile network, its then time to return it.
Where is the issue ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @MogaRaghu
If camera used to work fine before, please reboot camera first.
Can you help collect the log of camera, so we could look into the issue further.
How to Get the Log of Tapo Camera?
May I know the model of router and extender, and your network map? Were you able to access the camera remotely through the extender?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @MogaRaghu
Thank you very much also for providing the log, yes, we can see that there are different cases about camera remote control issues, but some of them are solved by trying different troubleshooting steps, in further troubleshooting some are approved to be related to firewalls, DNS settings or some other factors. So far none of them has been considered as a known issue.
We appreciated your time for collect log, unfortunately the log file is pretty short we could not find useful information. If you got some extra time, you could reboot camera, wait camera to boots up completely stable on, then enable Diagnostic and collect the log at least for 5mins when camera is running. I will also create a support ticket for you to follow up your case through email, please check your inbox later.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for escalating the issue.
But just now for once I could view it over my mobile network. Of course it took long to connect.
I thn checked the signal strength. It was -67 RSSI.
What is the range of signal strength for a good connection ?
- Copy Link
- Report Inappropriate Content
-67dBm is still acceptable, signal strength lower than -68dBm may cause poor experience and that is pretty close.
If reminds me that if your extender use the same SSID with router, camera may roam between router and extender, and go offline sometimes especially when signal is not that strong. If possible, please put camera closer.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Just noticed one aspect. Just out of curiosity, tried to check if it works with an Android phone ( Android Version 8 ) . It works without any issue. I can view in both local wifi and remote mode over Mobile data.
So obviously my router / internet bandwidth are all fine. Just that that app on the iPhone is an issue.
Not sure how many have noticed this fact.
Thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 907
Replies: 9
Voters 0
No one has voted for it yet.