P110 - Energy Monitoring > Periodic Billing - Unable to save settings
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
P110 - Energy Monitoring > Periodic Billing - Unable to save settings
Tags:
#Energy Monitoring
#Schedule
#Periodic Billing
The following is the same for all 4 of my P110 Plugs!
- 1 - Launch Tapo App
- 2 - Select Device (P110)
- 3 - Scroll up from the bottom and select 'Show More'
- 4 - Should see Energy Monitoring > Energy Usage
- 5 - Click the pencil to 'Edit'
- 6 - Click Bill Type
- 7 - Select Periodic Billing
- 8 - Hit SAVE
- 9 - Edit the Time-of-use/Off-Peak/Mid-Peak/Peak values as suits your billing
- 10 - SAVE is greyed out and cannot be used, so settings are not retained
- 11 - Sync bill settings to all plugs - Also fails to save/work.
Please fix this bug.
Re:P110 - Energy Monitoring > Periodic Billing - Unable to save settings
thank you for sharing the case details!
It looks that the app does not accept '0' as the value in the Mid-peak hour section, please try to put in a random number like 1 in the Mid-peak hour and see if you can save it.
This will not be counted in the bill if you only have Peak/non Peak hours in the table.
