@Welsh_Mike You sure can. In the list of available standard names scroll down to the bottom and you will see Custom. Select it and new screen will open where you can enter the name you want for that...

@Fjeldsted Please run the following test: unplug Ethernet cable from Unit 2, power off Unit 2, power it back on. Wait for about an hour. After that, check in Deco app if Unit 2 established powerline...

@rikishi rikishi wrote as a test, I removed power from the "main" AP (the first one set up). Although the clients re-associated to the remaining AP and could access the internet with no problem, the...

yves_b wrote @Alexandre. If the Deco could be configured with a static IP in AP mode, the Deco would promptly detect that Internet is reachable, and would immediately stop acting as a DHCP server....

yves_b wrote @Alexandre. If the main Deco is not bounced, will it answer to DHCP requests from its WAN port? @yves_b Yes, it will. In situation described in this forum topic, Main Deco will answer...

@Gusj If you switch Main network to only 5GHz, devices that can only use 2.4GHz will not be able to connect to Main network. If you know for sure you have such devices, keep dual band setting with...