@ayoung1969 You need both client and WiFi mesh that support WiFi6 or WiFi6E to see benefits. Having said that, there is a caveat: if your WiFi mesh hardware is quite old or underpowered, replacing it...

@Helga You should see "MESH" button for all devices wirelessly connected to Deco, and it will not be shown for devices that are wired by Ethernet cable. We may need to use that button later, but for...

@Bahamas What you are saying makes sense. It would be very unlikely to have hardware failure on all three Deco from the set. There are just two things as a result of your findings. I've been on this...

@Helga I will give you recommendations on how to make your Deco mesh work better, and they will be based on what I did at my house with my Deco M9 Plus. But I must say, your Internet speed which is...

@Bahamas Deco X50 is supposed to provide 2.4GHz service when enabled in WiFI settings. It is possible, you've got defective Deco node or whole set. If you can, return it. I would also suggest...

@Bahamas To avoid further interruptions to your Deco mesh Main Network WiFi, I would suggest the following: Enable Guest Network with its own SSID and password, and with same Security as Main...