@THEJEFFBIGUY See this FAQ from TP-Link: What’s the difference between Access Point mode and Router mode on the Deco?

@THEJEFFBIGUY I run my Deco mesh in Access Point mode. My ISP Router runs in its default router mode. I turned off router WiFi. I had to use an air vent to pass Ethernet cable from the basement to...

@DorH I just tested it on my Deco mesh again, to make sure TP-Link Deco cloud is not experiencing issues currently. My setup : Main Deco - M9 Plus Satellite Deco - two M5 on firmware 1.6.0, one M9...

@DorH Sometimes, unusual glitches with Deco app and Deco mesh are fixed with just a reboot. Power off all your Satellite Deco. Power off Main Deco and power it back on. Restart smartphone with Deco...

@JonvandenB Increase QoS setting up to 500, it may still be set at 300 and this is what limits the speed. See Using QoS feature of Deco

@crod As a first step, turn off 2.4GHz in Deco Main Network. If that did not make the difference, you could try more drastic step. Configure Virgin Hub to run in its default Router mode, configure...