@Jesus_Contreras Hey Easy one to fix this, you are running an encryption cypher called TKIP, change this to AES Log into the router and under WIFI change encryption to AES, see example below TKIP is...

@Paulius0 Hey To the best of my knowledge most vendors (TP Link included) stopped support USB print servers in their routers a few years ago now, cant think of any router I have purchased recently...

@aacuanico Hey Looking at your reply and screenshots there is little to be concerned about there, it looks to be setup fine.. so its not a config that i can see However what firmware are you running...

@Dean1gsheheyw Most switches that have 4x POE are 60watt which is around 12v 5amp so its possible. Not all switches have POE however so you would need to check first.

@BartGabriels I am lead to believe its a temporary change, it will revert back to self detecting in a later controller update. The reasoning was address the ridiculously low speeds it was detecting...

@Dean1gsheheyw Sadly the AP offically requires 24v passive or POE with af/at standards, that aside i know a customer that does have a ubiquiti AP running off solar with a battery.. he uses this Tycon...