@Virgo I'm now seeing this with the ER605 V2. Dirt on finally in see readoption events in the log and then eventually the router disconnects permanently from the controller. At this point the network...

Simple enough..., the OC200 is powered over PoE by a TL-SG2428P, plug a USB Key formatted as FAT32 and nothing..., apart from the "No storage device is connected to the USB port" message. Thoughts ?

@Pieter_H I notice you have the OC200 connected directly to the ER605 router. I had this same layout in my network and ran into a bunch of stability problems, including reserved devices getting...

This network layout with the OC200 connected to a LAN port of the ER605 router causes the ER605 to have constant disconnects / adopt / provision / configure loops This config, with the OC200 attached...

Network topology looks like this: There are 6 Interfaces defined: Games Interface 192.168.40.1/24 40 Guest Interface 192.168.30.1/24 Portal_Default 30 Internal Interface 192.168.10.1/24 1 IoT...

I have a four EA225 AP's setup on a management VLAN 192.168.200.0/24 (as well as three JetStream switches, an ER605 router and OC200 controller). The OC200 is on a static IP (192.168.10.10) and the...