I've met the problem before. It's because the 4300 couldn't get a default gateway when working on the WDS mode. As a result, even if the PC outside can have access to the FTP Server, 4300 doesn't...

Hi Ken, in my opinion, either repeater or AP mode is not a best choice. In the repeater mode, there's no doubt that 7210 can cover the signal into the house. However, communication is bidirectional....

Navigate to the web management page of 1043, Bandwidth control > Control settings, be sure that the options are not selected. Turn to NAT option, enable hardware NAT. Reboot the router and have a try...

1. Configure your CPE510 to Client mode with DHCP disable and mount it to face the direction of where your friend is. 2. Wire connect the LAN port of CPE510 to the WAN of 4300 and then setup the...

rui tavares wrote @ stupidbird: I already disbled DHCP on the Asus. It also has something like DHCP forwarder. What is that for? In this scenario the APs are forwarders as you mention when the...

In this scenario, double NAT doesn't matter as rui tavares only want to visit the printer in his house. For the device in his daught's room, the printer is on the WAN side. Double NAT makes trouble...