Hi @tomn68 Fallback IP can be considered as EAP default IP address. But the EAP will obtain IP from the router once it is connected to the router. This fallback IP has nothing to do with your...

Hi @Patrick8277 You can go to Online Detection option and change the detection mode to manual, change it to Ping 8.8.8.8 For default mode, tplink router will try ping the gateway but if your Modem is...

@Jav80 Try replace the Ethernet cables. Make sure you are using Cat5e or higher level. Also please connect EAP245 5Ghz wifi network. Some devices may not able to get high speed with 2.4Ghz wifi.

Hi @YMKapare 1. Please check the WAN settings-->bandwidth. The router will prefer to use the faster WAN according to the "bandwidth" number you put in; 2. Please make sure Load Balance is Enable; 3,...

Hi @Mark_TSB Could you please tell us why you need to disable NAT of the router? You can use a switch to replace the router if you don't want NAT. But I don't think it is the thing you really...

Hi @Kaius Please try reset the switch. The router could be reset somehow so it does not match the switch settings anymore. Reset the switch and then adopt Router and switch again on the controller...