@alitheog As now, you cannot log in to the controller via the cloud. You can try logging in locally using the local IP address of the OC200 on the same network. Please check that the Omada Gateway...

@Jarek78 The router does support NAT loop back. For this problem, we thought it was related to the configuration. Can you show us how you configure port forwarding? Are you using WAN IP+ port number...

@sh809188 For the disconnect status, it means the connection between the EAP and the controller is broken. Also, after the update, it will disconnect for a while and then return to normal, if it...

@TomV8B Are you connecting a router to the client mode CPE210? If so, please try to check if the router receives the WAN IP address？ Or you can connect the PC directly to the Client Mode CPE210 to...

Hi @Zack_Amin Could you please try to add a test 5Ghz only SSID, and check if the issue still happens? Follow the screenshot settings for this 5Ghz only SSID:

ITV wrote Team, Is there a way to connect an external antenna to the normal EAP653-V1? Assuming yes: what kind of connector is expected? Cheers - Will Hi @ITV The EAP653 does not support external...