@EliasSoares Are you sure that the switch is a TL-SG1016D and not a TL-SG1016DE? If the switch is unmanaged, how did you enable and disable port isolation and loop prevention? If the switch is a...

@Vincent-TP Thank-you for your response. I am mostly interested in the traffic counters, for example, the Top 5 Clients and the Top 5 Apps on the site's Dashboard. It would be helpful to also clear...

@GeorS At first glance, your switch configuration is incorrect. Ports 1 and 8 have no untagged VLAN configured. Each port should have one (and only one) untagged VLAN. There are also several...

From time to time I need to reset the statistical data in the controller. The only way to do that now is to do a backup/restore operation. Please consider adding an option to reset the statistical...

@Napsterbater I agree with you that the ETH0 port should be configurable. I'm still searching for something I read a while back on the subject of the native VLAN 1 being required on at least 1 port....

@Napsterbater I believe the ETH0 port behavior is by design. There must be a way to initially configure the AP and that guarantees access.