Eric_Le_GrompfLV2Online
Following: 0Followers: 1
Forums/ Deco
2023-03-22 11:38:52
Re:Deco network - xbox series s double nat
@Dinreko Did you restart or renew all the IPs on all your devices ? Switching to AP mode will remove the deco's private address range (and the DECO's router too). You'll be on your modem/router...
0HELPFULS
Forums/ Deco
2023-03-22 10:46:25
Re:can secondary router be attached to Deco?
@VladimirAlexiev OKAY, through your last post i see a better picture of it. It seem to be at a lower level than i firstly expected. There's not established physical link. first DECO and Archer are...
0HELPFULS
Forums/ Deco
2023-03-22 10:22:02
Re:Deco network - xbox series s double nat
@Dinreko This is not in the DECO but in your ISP modem/router that you'll find this setting (ISP documentation or data is required). If you don't know how to do the job safely : please stick to the...
0HELPFULS
Forums/ Deco
2023-03-22 10:14:08
Re:How do you allow an FTP transfer from Different Wifi using Deco
@Dualrifle Hello, As regard FTP, port forwarding needs to take account of the age of FTP. There's one control port (21) and one data port (one among the high ports). The data port is either...
2HELPFULS
Forums/ Deco
2023-03-21 16:14:24
Re:Deco network - xbox series s double nat
@Dinreko You're using your GPON as a router (HGU). you need to switch it to bridge (SFU) and let deco control the connection if you want to keep DECO in router mode. Please check with your ISP to get...
3HELPFULS
Forums/ Deco
2023-03-21 15:59:12
Re:How do you allow an FTP transfer from Different Wifi using Deco
@Dualrifle Please if using deco in router mode and IPv4, check :DECO's FAQ You cannot hope to jump over NAT without doing port forwarding. Anyway doing FTP over port forwarding can be tedious : FTP...
3HELPFULS