Forums/
Switches
2024-11-21 00:49:16
Hi @xHAWAKx Thanks for posting in our business forum. xHAWAKx wrote Hi @Clive_A, Clive_A wrote Hi @xHAWAKx Thanks for posting in our business forum. xHAWAKx wrote Hello @Clive_A, PVID for port 23 is...
0HELPFULS
Forums/
General Discussion
2024-11-20 03:49:38
Hi @Ph0enix_75 Thanks for posting in our business forum. Ph0enix_75 wrote @Clive_A Hi and thank you for your reply, here is the way it's configured at moment and maybe you can point my mistake so i...
0HELPFULS
Forums/
Cameras
2024-11-20 02:06:53
Hi @IndianaSxS Thanks for posting in our business forum. IndianaSxS wrote @Clive_A No big deal as I plan on getting an NVR anyways I just wanted to test the cameras first. Besides a hard drive what...
1HELPFULS
Forums/
General Discussion
2024-11-20 01:55:06
Hi @Ph0enix_75 Thanks for posting in our business forum. If they don't get an IP address, and you are certain that you have put the VLAN ID in the SSID, that's a VLAN tag issue on the ports(switch)....
1HELPFULS
Forums/
Cameras
2024-11-20 01:49:04
Hi @IndianaSxS Thanks for posting in our business forum. Seems to be that way. We indeed support the SD card but usually, the video stream would pull from the NVR first. This could be something...
0HELPFULS
Forums/
Switches
2024-11-20 01:35:18
Hi @xHAWAKx Thanks for posting in our business forum. xHAWAKx wrote Hello @Clive_A, PVID for port 23 is set as 1 Routing table in the switch is set up as in picture below The gateway IP is 10.99.10.1...
0HELPFULS

