I second this, the EAP225-Outdoor has an excellent coverage. However, keep in mind that client devices might not produce such good signal strengh over 140m. For example, my Neffos N1 cannot cover...

This HowTo describes how to create a wireless guest network using Omada EAPs and Omada Controller. There are several ways to set up an isolated guest network on EAPs depending on your requirements...

@g00dman, I always recommend to use a static (fixed) IP for stationary devices such as routers (hehe) and switches. AFAIK you cannot disable ICMP in the switch (didn't ever check this), but what you...

Hi JaypeeMaestre, this sounds weird, but could be a software incompatibility. I have only one last EAP220 on a SW controller V2.7 (but no voucher portal) at a customer's site. Maybe forrest from...

columcille, I never heard of 400m range for an EAP110-Outdoor . EAP110-Outdoor V3 is specified to 200m diameter, that's a radius of 100m (there had been some confusion in the specs for V1 two years...

Technically speaking, Bridge mode is the same mode as Client mode with the only exception that in Client mode the device is an endpoint and does not enable a virtual AP interface in addition to the...