Generally, 1000BASE-X SFPs should work in a SFP+ port. Since SFP+ GBICs can't work with 1000BASE-X SFP GBICs on the other side of the fiber, the T1700G's SFP+ port must support SFP GBICs, too, since...

1. Do a factory reset on the switch. 2. Set your PC to the subnet 192.168.0.0 (e.g. set fixed IP 192.168.0.20). 3. Start a browser (Firefox, Chrome, Opera). Clear the browser's cache. 4. Load the web...

markgraham wrote I do want to set up an AP - Client pair, but found that running AP with 27dbM and even 11dbM wifi the unit stopped communicating as described. So I tried to see if it was due to the...

Don't buy the whole equipment w/o having tested beforehand! Get an EAP110-Outdoor from Amazon for testing, you can send it back if it does not fit your needs. As for iperf rates in EAP110-Outdoor's...

aftercries wrote If the device fault, why it can connect when i press the reset button and reconfigure ? Theres no hard reset on CPE / cmos rest ? or something else :( If the flash memory is faulty,...

Wireless roaming is part of the WiFi negotiation process described in IEEE 802.11. It's so self-evident that you won't find much about it on the Web. RE your question: no, there are no other settings...