Works for me. Set up the Client to lock to the AP's SSID (WiFi survey -> select AP -> click Lock to AP -> Apply -> Save). Disable ESSID broadcast on the AP, apply, save. The client CPE will...

Yes, but maximum length of 100m for Ethernet copper cable (60m+40m) still applies.

SVNSYS wrote So if I buy a TL-link R470T+ it will not speed up my internet connection if I use 2 totaly different providers ? Why does TP link then put it on the website ? Of course it does speed up...

Setting up the CPE for house C in AP Router Client mode alone will by no means isolate the main subnet from the one used in house C. Any device in house C's network still can reach any other device...

RTouris wrote One more thing I just noticed is that in performing any speed test between two CPEs that are quite afar away with lower connection throughput (~20mbps) due to the time it takes for the...

beamboy wrote 1) if I mount cpe210's on the outside of the building will they work in client mode to feed the TL-WR841HP V3's via cable inside without MaxStream? ie. does the wbs210 act as an ap for...