Why isn't the fixed firmware made available on the TP-Link website or at least as a beta version here in the forum? I have T1600G switches in the field, too, but also other business-class gear for...

Then why don't you put the switch into the VLAN you want it to have by assigning a fixed IP from the appropriate subnet? I don't understand what's the problem doing so. If you want the switch to...

beamboy wrote Set: Antenna Gain: 0 (30dBm) You should be aware that 1,000mW EIRP for 2.4GHz band is illegal in most countries and in the worst case your WiFi equipment could be seized (again...

Panda wrote Hi R1D2, is this issue always happen when you reboot it? Yes, this happens every time after a reboot on a TL-SG108E v2 and a TL-SG108PE v1.1. It does not happen on a TL-SG2008 v1, which...

If you set up the EAP in stand-alone mode and then adopt it by a controller (which you don't need at all with only one EAP), then stand-alone settings of the EAP get overwritten by controller...

beamboy wrote I was unsure what to put into the WBS210 settings for the TL-ANT2415MS for 'Antenna Gain' so I put in 15dbi as the Antenna specs. That's the correct setting. Also found t he two...