Forums/
Switches
2019-10-30 06:58:30
@raymccoy I absolutely agree there is no sense in dhcp for switch, but there is one thing, which you can do. If all your network works via DHCP, you can change LAN IP (to 192.168.0.254 or any other...
0HELPFULS
Forums/
Pharos Wireless Bridges
2019-10-30 06:51:04
@R1D2 Yes, you are right, my bad. @AndreaPellegrin CPE610 is Pharos, not EAP. CPE610 doesn't support normal 802.3af/at PoE from tp-link switches, it supports only Passive PoE, so you will have...
0HELPFULS
Forums/
Switches
2019-10-29 11:12:14
@RicardoCarvalho I would swap the switch, if it is on warranty.
1HELPFULS
Forums/
Switches
2019-10-29 11:03:56
@RicardoCarvalho I even tried to make cable diag with a 4pin wire, but I still have all 4 pairs in output. It seems like your ports are really broken.
0HELPFULS
Forums/
Pharos Wireless Bridges
2019-10-29 08:54:10
@Wello It is broken then, nothing you can do.
0HELPFULS
Forums/
Pharos Wireless Bridges
2019-10-29 07:39:51
@SE81293 There was a problem with CPE reset indeed. The latest official firmware fixes it (use firmware from hw 3.2). If you have that problem with the latest firmware, and also if we look at your...
0HELPFULS