@Danielteuschl But remember, disable IPsec VPN befor you configure SD.WAN

@Danielteuschl it's pretty simple, go to global view, go to SD-WAN press add, enter an SD-WAN IP range. there I have used 172.31.254.1-172.31.254.254 follow the wizard. I did a test now set up a full...

@Danielteuschl but you can test if you have the same problem with SD-WAN then, it's a 120sec job to set up, disable the existing vpn tunnels on all sites. before configuring SD-WAN you don't need to...

@Danielteuschl exactly the same :-) except that I use both routers as initiator unless there is a good reason to have it as responder. It seems very strange, I have not had any problems with VPN, I...

@jonmaxey I have ER8411 with VPN to two ER707-M2 and various other routers all with the new firmware, working without problems with both IPsec site to site and SD-WAN My IPsec settings look like this

@Steviep if it's like on ER706W on Omada then you also have to enable gateway on SSID,