RTourisLV3Online
Following: 1Followers: 4
Forums/ Pharos Wireless Bridges
2017-04-19 05:47:20
Re:CPE510 station Rx rate drops to 6Mbps momentarily
Replacement units exhibit exact same symptoms. So i take it this is normal behaviour since it doesn't seem to affect the actual throughput. I enclose a link showcasing the issue during an active...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-04-19 05:33:01
Re:How strong should a signal be over 3km?
You really should be able to access both the WebUIs from one site, then start the server on any CPE of the two, switch the tab / window to the other CPE 'i.e. the client' specify the previous CPEs IP...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-04-13 00:32:54
Re:How strong should a signal be over 3km?
Try reducing your MCS rate from 15 to 12 you'll probably manage 1-2dB more
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-04-12 17:12:48
Re:CPE510(EU) v1.1 will not connect to CPE510 v1.1
So I moved the (EU) client literaly opposite the non(EU) AP and managed to get a theoretically maxed out -i.e. 300mbps- connection. Will conduct further tests and report back in due time.
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-04-12 17:09:57
Re:CPE510 station Rx rate drops to 6Mbps momentarily
Ive been monitoring this for the last couple of weeks, even opened a ticket with TP-Link's tech support to which I have no reply yet, however in an effort to try and troubleshoot this I moved one...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-04-10 17:29:52
Re:How strong should a signal be over 3km?
Victor Ramos wrote 1.- for that distance, has low power, only 17 dBm (50mW) is little for what gives the device 27 dBm (500mW) ..., raising the power technically should improve the link, the decent...
0HELPFULS
1202122...