Model : Hardware Version : Firmware Version : ISP : Hi all, just setup and activated yet another simple PtP link (AP#2/Client#2) 2.5km away having just acquired a missing CPE to act as a client. In...

+1 baldog: I'd first opt for the height increase scenario, it paid dividends in most of my cases ;) Do you have a clear LoS? Even if you do the Freshnel zone is equally as important..For example if...

It's MCS 8-11 that's missing, same on all 6 of my CPEs so far, including v1, v1.1 and v1.1(EU) hardware. No idea why either..

I thought you said you had CPE #2 in AP client (router) mode, no? If that's the case I suggest changing it to plain client mode...

Transmission power cannot be increased since this is an 1.1(EU) model that is hardware-locked Tx to 17dBm (not to mention that going beyond that it would be illegal anyway)

baldog wrote How would i select/change the MCS? Here's how to change MCS rates. Be wary that you have to do so for BOTH the AP and the client CPEs. Here's why you should play around with it according...