@Pmb222 Hi, If you reset the TL-WPA4220, then the Wi-Fi name and the Wi-Fi password should revert to the ones printed on the sticker. From the user's manual: "Press and hold the Reset button for at...

@Joleen Hi, To answer your last question. Yes, after you performed a factory reset you will have to setup your Archer AX72 again, just like when it was new out of the box. And no, there is no other...

@Bunker_Ram-87 After a successful reset the Wi-Fi should be without password and when accessing the settings for the first time the user should be asked to enter and repeat a new password. If you are...

@picchio Hi, Some technical information about these Wi-Fi adapters can be found on this website: https://wikidevi.wi-cat<dot>ru/TP-LINK_Archer_T_series (replace <dot> with . ) The T3U Nano should be...

@RedTony Hi, Yes. In general, all Powerline adapters that follow the "HomePlug AV" and "HomePlug AV2" standards are compatible with each other. (which means you can pair any of them as you wish) Of...

@Bunker_Ram-87 Hi, Press and hold the small "Reset" button for a couple of seconds and then setup the RE200 again. (refer to the official Quick Guide for setup instructions)