Dear @laboratorio101, As you can see I've got an unmanaged POE Switch after the T1600 to power on APs. Did it let everything pass through (VLAN1 & VLAN2) or it will break communications? Good...

Dear @laboratorio101, So, are you saying that my netwok, where I did not creat VLAN at the moment is virtually into VLAN1, so I must creat a VLAN2 to isolate that clients? Or do I have to create also...

Dear @M.Ed, To locate the problem, may I know your application scenarios and check the following information? 1. How do you find the VPN connection drops when you use heavy download? For example, do...

Dear @martyw96, In the end, my issue was that I had maxstream enabled and so I was unable to connect to the WiFi. Thank you for your feedback. That makes sense. MAXtream is only available on Pharos...

Dear @EternuS, Try the points below and check if it helps. 1. With the switch powered on, please use a pin to press and hold the reset hole for about 8-10 seconds to factory reset the switch, you...

Dear @laboratorio101, - Do I have to reach each of the T1600G-28TS and change their IPs to manage them individually, without causing conflicts TP-Link switches all use 192.168.0.1 in default...