@JPK577, Building a PtP link using two CPE devices is a typical usage, see as the picture shown below. And you'll need to add a wireless router or access point in the building to do wireless...

@Tutek Tutek wrote I'm looking for CLI command to list model and type (multi-mode, single-mode) of SFP module installed in switch? show interface gigabitethernet 1/0/52 status - this command do not...

Confirmed wrote Controller: 192.168.100.0 subnet, VLAN 10 connected to an untagged port on VLAN 10 on the switch (can't change this or it will lose communication with the EAPs it is controlling EAPs...

@wuppi like this, fix the 5G channel in band1, don't select auto.when you fail to adopt it,any error message ?

@GokhanT tplink does have a long way to go, but there's no denying that they do produce a lot of good products, so maybe we can give a little more patience to a company like this. Extra: IPsec is...

@CoKro Did you open ports on your router for your NAS device? According to my understanding, DDNS is used to achieve dynamic IP and domain name binding, your NAS can use a static IP in the LAN, so I...