Forums/
Range Extenders
7 hours ago
@RobertoMario If your LAN is (for example) within 192.168.1.0/24 subnet for stability and easier management I would do the following: Set both REs that are in AP mode with a static IPs outside MR600...
1HELPFULS
Forums/
Range Extenders
7 hours ago
@RoadRoller You can go ahead and install this FW release. (UN) comes from universal.
0HELPFULS
Forums/
Wi-Fi Routers
8 hours ago
@PatK This guide should help you to configure your nano router in client mode and transform your printer in a wireless client device.
0HELPFULS
Forums/
Wi-Fi Routers
8 hours ago
@WestOfBen The reason you can find this model is that it's targeting ISPs and its firmware is not supported by the community. You should follow up with your ISP regarding this issue and ask them for...
0HELPFULS
Forums/
Wi-Fi Routers
8 hours ago
@Morkhod To be able to select wireless channels you have to disable Smart Connect feature.
1HELPFULS
Forums/
Wi-Fi Routers
9 hours ago
@Rahul7887 Yes, that's correct but this model is not supported by the community and that's the reason you can't find any firmware releases on the support portal. If you want to try a different...
0HELPFULS