I have a simple need: VLAN 1 to be used as is for all AP's (8) guest wireless VLAN 2 to be used for Office Computers, IP phones Problem: I have 5 switch installations. All 5 switches will need VLAN 1

Is there any way to use the SFP port with a copper RJ45 cable? Thanks for your help.

My network uses a 5-port smart switch (TL-SG105E) to distribute 2 subnets and is configured for port based VLANs. VLAN 1 uses two of the ports and VLAN 2 uses the other three ports. VLAN 1 is cabled t

Is it possible to have a separate DHCP range for a VLAN? I.e., for the default vlan 0 network, the DHCP range is 192.168.100.1/22 and then VLAN #3 is 192.168.3.1/22 I have see a post elsewhere saying

Hi: In my installation when the SFP WAN connection fails the following messages show in the controller (error icon) [SFP WAN] of GW-CORE is down. (info icon) [Failed]GW-CORE: PPPoE user@domain failed

Hi: In recent 1.3.1.x betas the regular SSH interface of a very useless limited linux shell has changed to a cisco-style command interface, but I find absolutely no way to enter privileged mode.. enab